IRIS
Appears when you set LENS to REMOTE.
Selects how to adjust the iris. You can select AUTO or
MANUAL.
AUTO: Adjusts the iris automatically.
MANUAL: Adjusts the iris with the IRIS control on the
RM-C950 remote control unit.
Selection
Function
AE LEVEL
Sets auto exposure focusing point in the range from
–127 to +127.
AE AREA
Sets the AE (Auto Exposure) window when the camera
is set to AGC, CCD IRIS or auto-iris control mode.
MULTI: Divides the screen into 9 sections and adjusts
auto exposure according to the luminance level in
each section. Normally set to this position.
LARGE, MID, SPOT and SLIT: Displays the following AE
windows and adjusts auto exposure according to
the luminance level in each area.
Selection
AE AREA
(Continued)
LARGE
MID
SLIT
SPOT
Function
MANUAL: Sets the AE window with the desired size and
position on the screen.
Follow the steps below.
1 Select MANUAL and press the ENTER button.
Cross
cursor
Set Top-Left Point
Move Cross Cursor
Cancel
Next
MENU
ENTER
2 Move the cross cursor appearing at the left top
corner with the
,
,
or
button to set the upper
and left side size, then press the ENTER button.
Set Bottom-Right Point
Move Cross Cursor
Cancel
Next
Back
MENU
ENTER
BARS
Chapter 2 Operation
Cross
cursor
(Continued)
19
(GB)