Philips Cucina HR7639 Recettes & Mode D'emploi page 12

ENGLISH
12
Filter
With this filter you will make delicious fresh fruit
juices, cocktails or soy milk in next to no time. All
pips and skins will remain behind in the filter.
1 Assemble the blender jar.
C
2 Put the filter in the assembled blender jar.
Make sure that the grooves of the filter fit
exactly onto the ribs inside the blender
jar.
C
3 Put the ingredients in the filter.
Pour water or another liquid (e.g. for cocktails)
into the blender jar.
C
4 Place the lid in the sieve position.
5 Switch the appliance on. See the table for
the right speed setting.
If you have doubts about the right speed, select
the highest speed setting.
6 Switch the appliance off and remove the
blender jar from the motor unit.
C
7 Pour out the drink through the spout of
the blender jar. Do not remove the lid!
For optimal results, put the jar with the remaining
ingredients back onto the appliance and let it run
for a few more seconds.
Pour out the rest of the drink.
Tips
Particularly when you are processing large
quantities, we advise you not to put all the
ingredients in the filter at the same time. Start
processing a small quantity, let the appliance
run for a moment, switch it off and then add
another small quantity. Always place the lid!
Repeat this procedure until you have
processed all the ingredients.
For fruit juices and cocktails:
For the best results, add approximately 200 ml
water (or other liquid for cocktails, etc.) to 100 g
fruit.
For making soy milk:
Soak soy beans for 4 hours before processing
them. You can process upto the max. level of 2/3
the metal sieve of the filter with soaked soy
beans. Add 500 ml water and blend until smooth.
Mill
Preparing the mill for use.
Never use the mill for more than 30 seconds
without interruption.
C
1 Put the ingredients in the inverted beaker.
Process only dry ingredients. Do not fill the
beaker beyond the "MAX" indication.