Sony UPX-DP10 Mode D'emploi page 32

Preparation of the Printer
Loading the printing paper
32
Note
Never touch the printing side (the blank, glossy side) of the paper. Doing
so could leave fingerprints, which will harm image quality.
1
Fan the paper thoroughly.
If the paper is curled, uncurl it.
2
With the printing surface (glossy side) facing up, place the paper in the
paper supply/eject tray, making sure that the paper is under the tabs at
the end of the tray.
Stopper
Notes
• Do not place more than 25 sheets in the tray at one time.
• When loading printing paper in the tray, make sure that all of the
paper is completely inside of the tray.
• Do not use paper that is significantly curled.
• When outputting multiple sheets of paper to the eject surface of the
paper supply/eject tray, raise the stopper.
Printing surface
Tabs