Velleman VCC2 Mode D'emploi page 19

c) Backup
Make sure to select the intended backup mode before
you use the DSR system to record video.
Normal mode: Make sure you select the backup drive prior to the backup.
Click the down arrow in the backup drive box to display the available removable drive(s) for backup and
select the desired backup drive.
Archive mode: To switch to 'Archive' mode, click 'archive' , then 'apply' and 'OK'. The DSR application
should be closed and restarted to effect the change. At the start up in the 'archive backup mode', the
main screen of the DSR will be slightly modified with a new 'swap drive' button on the recorder panel
and two status bars for the removable drives are added to the bottom of the screen.
RED: indicates that the drive which is being used for video recording, is active.
GREEN: indicates that the drive is not active and that it can be removed.
d) Password Setting
There are two default usernames: SUPER and OPERATOR. You can create two passwords for security
use during the logon session.
e) Audio Setting
Choose the camera which will record audio.
f) Operation Setting
VCC2
19
VELLEMAN