Velleman VCC2 Mode D'emploi page 10

6) Recording Audio
HomeGuard has an audio function to record audio trough one of the cameras. Click Utility > Option
Setting > Audio Setting in the main screen.
The user can install a microphone through the computer's sound card (MIC in) or the HomeGuard board
(MIC in). To set the audio recording function, go to Utility > Option Setting > Audio Setting and choose
how the camera's audio is connected to the PC (computer's sound card or Homeguard board).
Before you can activate this function, make sure the sound board is installed and properly configured so
that the microphone can record sound.
Each card provides one audio channel that can be attached to any selected camera(s) for recording.
7) Archive Mode
Click Utility > Option Setting > Backup in the main screen. There are two different configurations for
recording and making backups of the videos.
Normal Mode: It will record the video onto the fixed hard drive (S). If required, you can backup the
recorded video onto a removable IDE drive through the housekeeping function in the Utility menu. The
raw copy of the video can be deleted during the backup process.
Archive Mode: It will record the video onto the assigned removable IDE hard drive(s). When it is about
full, it can be removed from the recorder for additional archiving to DAT or other backup media.
The Digital Surveillance Recorder will maintain continuous recording onto an alternate removable drive
during the archiving operation.
When the videos on a removable drive are obsolete, they can be immediately erased before recording
is resumed on this drive.
The recording configuration of the DSR should be selected at the very beginning of overall system
operation. The normal mode is set by default. To switch to the archive mode, go to the 'Backup
Function' in the 'Option Settings' menu. You will need to have two removable configured IDE hard drives
to support his mode.
VCC2
10
VELLEMAN