Velleman VCC2 Mode D'emploi page 11

8) Swap Drive
The swap drive button will appear on the main screen after you choose "Archive Mode". Make sure
that the system is properly set, that there are two available removable hard drives and a fixed hard drive
to support system operations.
Click the 'swap drive' button in the main screen. The 'swap drive' message box will appear (see figure
below).
Click the down arrow button in the 'select drive' dialog box next to the remove button to display the
registered removable drive(s) for removal and select the desired drive. Click the remove button and
follow the pop instructions to complete the REMOVAL process.
The removed hard drive can be put into another device and the entire drive can be backed up (archive)
to another long term media such as DAT or an equivalent device with a very large storage capacity but
these may not work as fast. This operation on a removed drive can be done off-line (while the DSR is
off) or in a separate PC workstation.
Reinserting the removable drive
Click the 'swap drive' button in the main screen and then the 'swap drive' message box will appear as
shown in the figure above. Click the down arrow in the 'select drive' dialog box next to the insert button
to display the registered removable drive(s) for insertion and select the desired drive. Click the insert
button and follow the pop up instructions to complete the INSERTION (RE-Insertion) process.
e. Video Playback
Click the 'playback' button in the main screen to open the video player. The video player provides
interactive video search and frame operations to play back the recorded video files.
VCC2
11
VELLEMAN