Bosch GDB 1600 WE Professional Notice Originale page 17

OBJ_BUCH-116-003.book Page 17 Thursday, November 18, 2010 11:49 AM
Wear non-skid shoes. This prevents injuries
that can occur from slipping on smooth sur-
faces.
Use only original Bosch accessories.
Connect the machine to a mains supply with
proper earthing connection. Socket outlet
and extension cable must be equipped with
an operative protective conductor.
Products sold in GB only: Your product is fit-
ted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be inserted into a mains socket else-
where.
Products sold in AUS and NZ only: Use a re-
sidual current device (RCD) with a rated re-
sidual current of 30 mA or less.
Instructions for operation without drill stand
Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal
injury.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
If the application tool should become
blocked, switch the machine off. Loosen
the application tool.
Before switching on the power tool, make
sure that the application tool moves freely.
When switching on with a blocked drilling
tool, high torque reaction can occur.
Bosch Power Tools
Instructions for operation with drill stand
Never leave the machine before it has come
to a complete stop. Cutting tools that are
still running can cause injuries.
Hold the drill stand by the insulated grip-
ping surfaces when performing operations
where the application tool could contact
hidden wiring or its own power cord. Con-
tact with a "live" wire will also make exposed
metal parts of the drill stand "live" and shock
the operator.
Instructions for the GDB 1600 WE
Never operate the machine with-
out the residual current device
(RCD) provided.
Before starting work, check the proper
function of the residual current device
(RCD). Have a damaged residual current de-
vice (RCD) repaired or replaced by your
Bosch after-sales service agent.
Pay attention that neither persons in the
working area nor the power tool itself come
into contact with the water that comes out.
When wet-drilling
overhead, the water
coming out must be
collected. For this, in-
sert the machine into a
drill stand and mount a
water collection ring.
Pay attention that water-conducting hoses,
connnection elements and the water collec-
tion ring (accessory) are in proper condi-
tion. Replace damaged or worn parts before
using the next time. Water coming out of
power tool components increases the risk of
electric shock.
1 609 929 V13 | (18.11.10)
English | 17