Panini Grill" Position - SilverCrest SKGE 2000 B2 Mode D'emploi

CAUTION
► Always remove the plug from the mains power socket when the appliance is
not in use. It is not sufficient to simply set the heat level control

"Panini grill" position

1) Open the appliance lid and place the food to be grilled on the lower
hotplate
2) Close the upper hotplate
safety catch
the safety catch
3) Check the browning of the food after a while. To do this, open the appliance
lid using the handle.
NOTE
Start with short grilling times and increase them until you identify the correct
duration.
4) When you are satisfied with the level of browning, remove the grilled food.
CAUTION
Damage to the appliance!
► Do not use pointed or sharp objects to remove the grilled food. These could
damage the surfaces of the hotplates
5) Turn the heat level control
power socket.
CAUTION
► Always remove the plug from the mains power socket when the appliance is
not in use. It is not sufficient to simply set the heat level control
■ 12 │ GB │ IE │ NI
.
and lock it at the desired height by pressing the
back (position MIN, II, III, IV, V). The further back you press
, the greater the distance between the hotplates
to MIN and remove the plug from the mains
!
SKGE 2000 B2
to MIN!
.
to MIN!