Cleaning The Hot Water Shower; Cleaning Accessories; Cleaning The Appliance; Descaling The Appliance - SilverCrest SEM 1100 A2 Mode D'emploi

Cleaning the hot water shower

Clean the hot water shower t after each use:
1) After you have prepared the espresso/cappuccino and removed the sieve
holder w, wipe the entire surface of the hot water shower t with a moist
cloth so that all powder residues are removed.
2) Insert the fi lter holder w back in without the espresso fi lters 0 q.
3) Then place an empty cup under the hot water spray t and turn the rotary
function switch 5 to the position "
t and rinses the last of the powder residue out.
4) After about 20 seconds place the rotary function switch 5 back to the positi-
on "
5) Take the fi lter holder w back off .

Cleaning accessories

1) Clean the fi lter holder w, the two coff ee fi lters 0 q, the water tank 1, the
measuring scoop 9 and the drip tray 8 in warm water.
NOTICE
► If you put detergent into the water, it may have a negative eff ect on the taste
of the espresso. If the stains can only be removed with detergent, always
rinse the items afterwards with lots of clean water.
2) Dry all parts well.
3) The drip tray r is suitable for cleaning in the dishwasher.

Cleaning the appliance

Clean the housing with a moist cloth. If necessary, use a little detergent on the
cloth.

Descaling the appliance

Regularly descale the appliance. The appliance should be descaled after about
200 espresso preparations. Depending on the hardness of the water in your area,
this fi gure may diff er.
For descaling, use commercial available descaler for espresso machines. Proceed
as described in the instructions for usage of the descaler.
If you do not have a descaler, you can proceed as follows:
1) Fill the water tank 1 to the marking MAX.
SEM 1100 A2
" and then switch the appliance off with the On/Off switch 3.
". Water fl ows from the hot water spray
GB
75