Technical Specifications; Mechanical Specifications; Electrical Specifications; Technical Data - VALPES DV 25 Manuel D'installation Et D'utilisation

Technical specifications
DV
Installation
IP protection (EN60529)
Corrosion resistance (outdoor and
indoor use)
Temperature
Hygrometry
Pollution degree
Altitude
Extended environmental conditions
Sound level
Weight
Mechanical specifications
Nominal torque
Maximum torque
Operating time (90°)
Drive ISO5211
Rotation angle
Mechanical stops
Manual override
Direction of rotation
Electrical specifications
Voltage
1)
(standard, GP5 and GF3)
Voltage 1)
(GP6, GPS and GFS)
Overvoltage category 2)
Power consumption
Insulation motor class
Torque limiter
Duty cycle (CEI34)
Limit switches maximal voltage
Limit switches maximal current
Anticondensation heaters
Inrush current
1) The actuator tolerates voltage fluctuation of the electrical grid up to ± 10 % of its nominal system operating voltage
The actuator tolerates temporary overvoltages of the electrical grid.
2)
48
25 45
Housing: aluminium + epoxy coating (« marine » high durability coating on request)
Drive : Steel + Zn treatment / Axles and screws : Stainless steel
-20 °C to +70 °C (BBPR, GPS, GFS : -10 °C to 40 °C)
maximum relative humidity 80 % for temperatures up to 31 °C decreasing linearly
Applicable POLLUTION DEGREE of the intended environment is 2 (in most cases)
Outdoor use and in WET LOCATION
20 Nm 35 Nm
25 Nm 45 Nm
15 s 15 s
Star 17 F05-F07
100 V to 240 V AC 50/60 Hz and 100 V to 350 V DC
15 V to 30 V AC 50/60 Hz and 12 V to 48 V DC
100 V to 240 V AC 50/60 Hz and 100 V to 350 V DC
24 V to 30 V AC 50/60 Hz and 24 V to 48 V DC
TRANSIENT OVERVOLTAGES up to the levels of OVERVOLTAGE CATEGORY ll
TEMPORARY OVERVOLTAGES occurring on the MAINS supply.
Circuit breaker type D, nominal current according the number of actuators (max. 4 actua-
tors) or use a inrush current limiter at the output of the circuit breaker.
75 100
IP68 (10 m 72 h)
to 50 % relative humidity at 40 °C
altitude up to 2 000 m
61 dB
6,2 Kg to 6,4 kg
60 Nm 75 Nm
75 Nm 100 Nm
15 s 15 s
90° (others on request)
90°
Wheel
Anticlockwise to open
45 W
Class F
Electronic
50%
4 to 250 V AC/DC
(Overvoltage category II)
1 mA to 5 A max
10 W
EN
150 300
125 Nm 250 Nm
150 Nm 300 Nm
30 s 60 s
Star 22 F07-F10
DSBA3800 • Rév. 01/10/2020