Display; Symbols And Text - Adam Equipment Eclipse EBL Série Notice D'utilisation

EN

7 DISPLAY

The LCD has several areas:-
A large 7 digit area to display the weight with symbols for common weighing units on its
right and symbols for zero, tare (Net) and stability on the left.
A small 10-character display line above the main display area. This is used to provide
additional instructions and information on the current operation or function being used.
A capacity indicator bar at the bottom of the display.

7.1 SYMBOLS AND TEXT

The LCD has unique symbols to indicate the following:
0
ti, Custom, MM, tl, T, lb, oz, dwt, GN,
dr, g/cc, g, kg, ct, mg,
Indicators:
"CAL"
"T"
"ºC"
"Net"
"Pcs"
"%"
© Adam Equipment Company 2015
When calibration is occurring or about to occur
For a time driven calibration
When a temperature is shown or a temperature driven
calibration is to occur
When a net weight is shown
When the balance is in the Parts counting mode
When the balance is in the Percent weighing mode
Zero
Battery charge state (if fitted)
Busy
Stable
Symbols shown for units and
modes
Capacity indicator bar
14
3016612482 Rev1-Aug15