Adam Equipment Eclipse EBL Série Notice D'utilisation page 21

EN
When the display shows zero, place the item to be weighed. Only the net weight will be
displayed.
When a tared weight has been stored, pressing [
The [Print] key is lit, indicating that print output to a connected device is available. Print
output will always be the net weight shown on screen, and in the current weighing unit
selected.
At any time the [Unit] key may be pressed to select another unit. Use the [Up] or [Down]
keys to scroll through the units and select the desired unit by pressing [Select], the display
will change to show the weight in the selected weighing unit. The available weighing units
can be enabled or disabled during setup of the balance (see section 13.1.). Only weighing
units that have been enabled will be cycled through when [Unit] is pressed.
Weighing Units:
You can select alternative weighing units to display the weight by pressing the [Unit] key.
Depending on model, the available weighing units may include:
Unit
1 GRAMS
2 MILLIGRAMS
3 KILOGRAMS
4 CARATS
5 PENNYWEIGHTS
6 GRAINS
7 TROY OUNCES
8 OUNCES
9 POUNDS
10 DRAMS
11 HK TAELS
12 TAIWAN TAELS
13 SING TAELS
14 MOMMES
15 TOLAS
16 TICAL
17 NEWTONS
18 CUSTOM
It is possible to set the balance to display only grams. Grams will always be one of the
units enabled, by default.
If "Custom" unit is available and selected, the balance will prompt for entering a multiplier
MULTIPLIER MULTIPLIER MULTIPLIER MULTIPLIER
by displaying "
from 0.100 to 10.000 may be entered, by which the weight in grams will be multiplied
before being displayed. If a multiplier of greater than 1.000 is entered, the number of
decimal places displayed will be reduced by one. This multiplier value will be saved for the
next use until it is changed by the user.
© Adam Equipment Company 2015
Symbol Models
g All
mg not 0.01or 0.1g
models
kg not 0.0001g
models
ct All
dwt All
GN All
ozt All
oz All
lb All
dr All
tl H All
tl T All
tl S All
mm All
T All
ti All
N All
Custom All
1 1 1 1 .2345 2345", where "1.2345" is the last stored value. Any value ranging
2345 2345
0/T] again will remove it.
Conversion Factor
1g =
1
1000
0.001
5
0.643014865
15.43236
0.032150747
0.035273962
0.0022046
0.564383422
0.026455
0.026667
0.026455464
0.266666951
0.085735323
0.0612395
0.00980665
As specified
19
3016612482 Rev1-Aug15
Conversion Factor
1 unit = grams
1.0
0.001
1000
0.2000
1.555174
0.0647989
31.103476
28.349523
453.5924
1.7718451
37.799364
37.499950
37.799375
3.749996
11.663804
16.32933
101.971623
As specified