Adam Equipment Eclipse EBL Série Notice D'utilisation page 34

Masquer les pouces Voir aussi pour Eclipse EBL Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
The [Print] key is lit, indicating that print output to a connected device is available. Print
output will be the computed density "XX.XXX
Remove the item from the pan and press [Mode] to continue with a new sample or press
[
0/T] to return to normal weighing.
10.4.6.2
Density of a Liquid
When finding the density of a liquid, it is necessary to weigh a sample of known volume in
air and then in the liquid. The volume of the sample must be entered by the user. The last
known volume is stored for use at any time.
If using the density determination kit, the volume of the plumb is marked on its support,
e.g. 10.123 cc.
Steps:
Press [Mode] and then [Up] and [Down] keys until "
press [Select] to enter this chosen density mode.
The volume will be asked for by displaying "
cubic centimetres (cc). Enter or change the volume if required, using the keypad numeric
entry method (see section Error! Reference source not found.) and then press [Select] to
continue.
The balance will now request the weight in air by displaying "
supplied with the density determination kit in air on the weighing pan and press [Select] to
start the air weighing. The value will briefly be shown in the last weighing unit selected.
The balance will now request the weight in liquid by displaying "
Submerge the glass plumb in the liquid and press [Select] to start the liquid weighing. The
weight will briefly be shown in the last selected unit, followed by the computed density of
the sample displayed as "
The [Print] key is lit, indicating that print output to a connected device is available. Print
output will be the computed density "XX.XXX
Remove the item from the pan and press [Mode] to continue with a new sample, or press
 ] to return to normal weighing.
[
0/T
 
© Adam Equipment Company 2015
VOLvME
VOLvME
VOLvME
VOLvME
DENSITY
DENSITY
DENSITY
DENSITY
XX.XXX
g/cc
"
" as shown on screen.
g/cc
Density
Density
Density
Density
Liquid
Liquid " is displayed and then
Liquid
Liquid
" and a value which is the bulb volume in
AIR WT
AIR WT
AIR WT
AIR WT
LIQ Wt
LIQ Wt
LIQ Wt
LIQ Wt
" as shown on screen.
g/cc
32
3016612482 Rev1-Aug15
". Place the glass plumb
".

Publicité

Chapitres

Table des Matières
loading

Table des Matières