8. Cleaning and maintenance
Before cleaning the power unit, always unplug it from the socket outlet!
– Clean the instrument with a slightly moistened cloth. You can also mois-
ten the cloth with mild soap suds to remove more stubborn dirt.
– If necessary, for reasons of hygiene, the attachments can be cleaned
with a cloth or brush moistened with alcohol. Dry them carefully after-
wards.
– Do not drop the instrument.
– Make sure that no water enters the instrument. But if this should happen,
do not use the instrument again until it is completely dry.
– Do not use chemical detergent or scouring agents for cleaning.
– Never immerse the instrument or plug-in power unit in water or other liq-
uids.
9. Accessories and replacement parts
Replacement parts and wearing parts are available from the corresponding
listed service address under the stated material number.
Designation
Sapphire wheel, fine
Sapphire wheel, coarse
Sapphire cone
Felt cone
Fine sapphire callus file
Cylindrical cutter
Flame-shape cutter
10. Disposal
For environmental reasons, do not dispose of the device in the household
waste at the end of its useful life. Dispose of the unit at a suitable local
collection or recycling point. Dispose of the device in accordance with
EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsi-
ble for waste disposal.
Item number and/or order number
162.750
162.751
162.752
162.753
162.754
162.755
162.756
22