Maintenance
5.3
Greasing the slider seal
At the bottom of the toilet bowl, there are two seals that receive the slider
when it is closed.
➤ Grease this area carefully to prevent binding.
6
5.4
Greasing the cassette seal
➤ Remove the cassette tank and place it on a firm surface. Pull back the
cover (fig. 7 1) so that the seal is accessible.
7
1
➤ Evenly grease the cassette seal (fig. 8 2) at the top with silicone-based
grease. In this way the cover remains movable.
➤ Close the cover (fig. 9, page 32).
9
32
8
1
Saneo B, Saneo C
2
EN