DeWalt DCGG571 Guide D'utilisation page 17

The fuel gauge is an indication of approximate levels of charge
remaining in the battery pack according to the following indicators:
75–100% charged
51–74% charged
< 50% charged
Pack needs to be charged
To actuate the fuel gauge, press and hold
the fuel gauge button (FF). A combination
of the three green LED lights will illuminate
designating the level of charge left. When
the level of charge in the battery is below
the usable limit, the fuel gauge will not
illuminate and the battery will need to be
recharged.
NOTE: The fuel gauge is only an indication
of the charge left on the battery pack. It
does not indicate tool functionality and is subject to variation based
on product components, temperature and end-user application.
For more information regarding fuel gauge battery packs, please call
1-800-4-D WALT (1-800-433-9258) or visit our website www.dewalt.
e
com.
Using the Grease Gun (Fig. 2)
WARNING: To reduce the risk of serious personal injury,
always maintain a grip on the handle (C) when operating the
grease gun or positioning the hose onto fittings.
To operate the grease gun, hold the grease gun by the handle (C), or
place it on a stable surface upright on its rubber feet (R) maintaining
a grip on the handle. Holding the hose by the flexible hose safety
spring guard (H), connect the flexible hose grease coupler (I) or
other appropriate grease coupler, onto the grease fitting to be filled.
Carefully depress the variable speed trigger switch to begin the filling
process. Once the correct amount of grease has been dispensed,
release the trigger and remove the coupler from the grease fitting. If
the coupler does not release, there may still be residual pressure in
the line. Moving the coupler from side to side can relieve the residual
pressure so it can be removed from the coupling. If the coupler leaks
excessively or does not hold on to the grease fitting, it should be
replaced.
FIG. 11
FF
MAINTENANCE
WARNING: To reduce the risk of serious personal injury,
turn tool off and remove the battery pack before making any
adjustments or removing/installing attachments or accessories.
An accidental start-up can cause injury.
15
TECHNICAL INFORMATION
Grease type
Voltage
Pressure
Volume/Flow rate
Grease capacity
Tool weight without battery
Hose length
Up to NLGI #2
20 V
10,000 psi (690 bar)
5 fl. oz./min (147.87 ml/min)
16 oz Bulk (453 g)
14.5 oz Cartridge (411 g)
8 lbs (3.63 kg)
42" (107 cm)