Display Plant Operating State - Siemens RMU7-B Série Manuel D'utilisation

Display plant operating state

If, during automatic heating / cooling operation, you want
to know your plant's current operating state (the room
operating mode), go to the info level:
1. Go back to the start display by pressing the ESC
button.
2. Press the INFO button.
The room operating mode is displayed as follows:
Room operating mode
Preselection
State Comf
Cause: Time switch
Building Technologies / HVAC Products
1-5
Meanings:
Preselection
The selected room operating mode.
In the example shown, the selector is set to
State
This is the current state.
In the example, heating or cooling at the comfort set-
point.
Cause
Here, the reason for the current state is given.
Possible reasons:
• Operating mode contact (manual changeover).
• Operating mode selector.
• Occupancy button on the room unit.
• Timer button on the room unit.
• Special day
• Holidays
• Time switch for the time program (as displayed).
CE1B3144x2 74 319 0350 0a
.
17
31.01.2007