Operate Aggregates Per Time Switch 2 - Siemens RMU7-B Série Manuel D'utilisation

Operate aggregates per time switch 2

When your controller is configured with a time switch, the
controlled aggregate (e.g. a pump) is switched on and off
per the set time switch program.
If also configured with [Time switch 2] op selector, it must
be set to auto, to automatically switch on and off the
aggregate per the set time switch program.
If a [time switch 2] op selector is available and you do not
want to control the aggregate per the time switch progra-
m, you can manually override it with the [time switch 2] op
selector either on or off.
If you want to set the plant to On or Off for a limited period only, do not forget to return to auto in due time!
Building Technologies / HVAC Products
Path: Welcome > Main menu > [Time switch 2] op selector > Preselection:
CE1B3144x2
Example of a time program:
Time switch 2
Saturday
Switched on at 6:00 am – switched off at 10:00 pm
74 319 0350 0a
11
31.01.2007