Transport And Storage; Cleaning And Maintenance - Parkside PAHE 20-Li A1 Traduction Des Instructions D'origine

Transport and storage

■ For transport, allow the motor to cool down and
secure the machine from slipping before trans-
porting it in a vehicle. This ensures that damage
or injury is prevented. The pole pruner should
always be transported with the transport protec-
tion device attached.
■ Use the blade guard
appliance.
■ Ensure that the appliance cannot switch on
during transport (see figure).
■ Always clean the appliance thoroughly before
storing.
■ Store the appliance in a dry place and out of
the reach of children.
■ Store the appliance horizontally or secured
against falling.
■ Empty the oil tank. Organic chain oil
become resinous.
■ For better retention of the mounting tool
can use this in the mounting bracket
│ GB │ IE
■ 34
for transporting the
can
You
.

Cleaning and maintenance

WARNING! RISK OF INJURY!
Always switch the appliance off and
remove the battery before carrying
out any work on the appliance.
■ Clean and service the appliance after each use
depending on the operating conditions. Failure
to clean the appliance may result in material
damage and malfunctions.
■ Never allow fluids to get into the device.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
climate is cool and dry.
■ The pole pruner must be cleaned of sawdust at
regular intervals. For this purpose, use a
compressed air blow gun, for example.
■ A new saw chain
tightened more regularly.
stretches and must be
PAHE 20-Li A1