Cameo MOVOBEAM 100 Manuel D'utilisation page 9

Colour Ring Macro
Colour Ring Macro Speed
DEVICE SETTINGS (Setting)
Pressing MODE will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "Setting" (coloured background)
and confirm with ENTER. You will then be taken to the sub-menu to set the sub-menu items (see list). The main display is automatically activated if
no input is made within about 30 seconds.
DMX 35 Ch DMX 35 Ch
ADDRESS 001 Display Rev
MODE xxx |
Setting |
System Info |
Reset
Setting
Display Rev = Flip Display
Display = Display lighting
DMX Fail = Operation status with DMX signal interruption
Dimmer Curve = Dimmer Curve
000 - 005 Colour off
006 - 013 Colour Macro 1 (Colour Jump)
014 - 021 Colour Macro 2 (Red 1 Step)
022 - 029 Colour Macro 3 (Green 1 Step)
030 - 037 Colour Macro 4 (Blue 1 Step)
038 - 045 Colour Macro 5 (Yellow 1 Step)
046 - 053 Colour Macro 6 (Cyan 1 Step)
054 - 061 Colour Macro 7 (Magenta 1 Step)
062 - 069 Colour Macro 8 (2step Magenta Yellow)
070 - 077 Colour Macro 9 (2step Red Green)
078 - 085 Colour Macro 10 (2step Red Blue)
086 - 093 Colour Macro 11 (2step Blue Yellow)
094 - 101 Colour Macro 12 (2step Green Blue)
102 - 109 Colour Macro 13 (2step Magenta Blue)
110 - 117 Colour Macro 14 (2step Green Yellow)
118 - 125 Colour Macro 15 (2step Cyan Magenta)
126 - 133 Colour Macro 16 (2step Cyan Red)
134 - 255 No function
000 - 255 slow -> fast
xxx
ON = Rotation of the display by 180°
(e.g. overhead installation)
OFF = no rotation of the display
ON = permanently on
OFF = deactivation after approx. 1 minutes of
inactivity
Hold = last command is held
Blackout = activates Blackout
Auto = activates the AUTO mode
Linear = The light intensity increases linearly with
the DMX value.
Exp = Adjustment of the light intensity is finer
in the lower DMX value range and coarser
in the upper DMX value range.
Log = Adjustment of the light intensity is
coarser in the lower DMX value range and
finer in the upper DMX value range.
S Curve = Adjustment of the light intensity is finer in
the lower and upper DMX value ranges and
coarser in the middle DMX value range.
9