Cameo MOVOBEAM 100 Manuel D'utilisation page 7

SETTING THE SLAVE MODE (Slave)
Pressing MODE will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "MODE" (coloured background)
and confirm with ENTER. Now use the UP and DOWN buttons once more to select the "Slave" sub-menu item, confirm by pressing ENTER and
press MODE twice to return to the main display. The main display is automatically activated if no input is made within about 30 seconds. Connect
the slave and the master unit (same model) with a DMX cable and activate one of the standalone modes (Auto, Static) on the master unit. Now the
slave unit follows the master unit.
DMX 35 Ch DMX 35 Ch
ADDRESS 001 DMX Mode
MODE DMX 35CH Slave
Setting Auto
System Info Static
SETTING THE AUTOMATIC CONTROL MODE (Auto)
Pressing MODE will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "MODE" (coloured
background) and confirm with ENTER. Now use the UP and DOWN buttons once more to select the "Auto" sub-menu item and confirm by
pressing ENTER. Using UP and DOWN, you can now select between two additional sub-menu items "Auto Prog" and "Auto Speed". Select
"Auto Prog", press ENTER and select one of the 8 different auto programs (Prog1 - Prog8) and confirm with ENTER. To set the running speed
of the program, press the UP and DOWN buttons to select "Auto Speed", confirm with ENTER and then, using the UP and DOWN buttons,
set the desired speed between 000 and 255 (000 = minimum speed, 255 = maximum speed). Confirm with ENTER and press MODE three
times to return to the main display. The main display is automatically activated if no input is made within about 30 seconds.
DMX 35 Ch DMX 35 Ch
ADDRESS 001 DMX Mode
MODE xxx Slave
Setting Auto
System Info Static
STATIC MODE (Static)
In the same way as with a DMX control unit, the static mode allows you to adjust all functions such as Pan, Tilt, Dimmer and Strobe directly
on the device with values from 000 to 255. Thus, an individual scene can be created without an additional DMX controller. Pressing MODE
will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "Static" (coloured background) and
confirm with ENTER. Use the UP and DOWN buttons to select the function of the Moving Head that you wish to edit and confirm by pressing
ENTER. The value (pan position, dimmer, etc., see list) of the corresponding function can now be set from 000 to 255 and press ENTER to
confirm the input. Once all of the parameters have been set as desired, press MODE three times to return to the main display. The main
display is automatically activated if no input is made within about 30 seconds.
DMX 35 Ch DMX 35 Ch
ADDRESS 001 DMX Mode
MODE xxx Slave
Setting Auto
System Info Static
Yes
DMX 35 Ch DMX 35 Ch
Auto Progx Prog1
Auto Speed xxx
Prog8
DMX 35 Ch DMX 35 Ch
Auto Progx
Auto Speed xxx
DMX 35 Ch
DMX 35 Ch
Pan xxx
|
|
|
Ring Macro Speed xxx
Yes
|
|
|
Auto Speed
000
Pan
000
7