Inserting Two Size Aa (R6) Batteries Into The Remote - Sony MHC-S90D Mode D'emploi

Tip
You can place the components as described below. In
this case, place the components first, then connect the
components.
DVD/VIDEO CD/CD
player
Tuner
A/V Amplifier
To attach the center and rear
speaker pads
Attach the supplied center and rear speaker
pads to the bottom of the speakers to stabilize
the speakers and prevent them from slipping.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Do not place the rear speakers on top of a TV. This
may cause color distortion in the TV screen.
• Be sure to connect both left and right rear speakers.
Otherwise, the sound will not be heard.
• When you play a VIDEO CD recorded in the
different color system from the one you set to the
system, the picture image may be distorted.
• The AC OUTLET on the A/V amplifier is for this
system's DVD/VIDEO CD/CD player only. Do not
connect other component.
Inserting two size AA (R6)
batteries into the remote
Cassette deck
Operating a Sony TV
You can use the following buttons on the
remote to operate a Sony TV.
To
Turn the TV on or off
Switch the TV's video input
Change the TV channels
Adjusts the volume of the TV
speaker(s)
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Notice for carrying this system
Do the following to protect the DVD
mechanism.
1
Turn on the system, then turn
FUNCTION to select "DVD".
Make sure that all discs are removed
from the unit.
2
While holding down EQ ON/OFF, press
?/1 until "LOCK" appears.
3
Release ?/1 first, then release EQ ON/
OFF.
4
Unplug the AC power cord.
]
}
}
]
Press
TV ?/1.
TV/VIDEO.
TV CH +/–.
TV VOL +/–.
MHC-S90D 4-235-983-43(2) GB
GB
13