Sony MHC-S90D Mode D'emploi page 35

** The letters in the program format display mean the
following sound component:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear component of the
Dolby Surround processed signal or the
Dolby Digital signal.
LFE: LFE (Low Frequency Effect)
The display examples are as follows:
• PCM (stereo)
PROGRAM FORMAT
PCM 48kHz 24bit
• Dolby Surround
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
L C
S
• Dolby Digital 5.1ch
When an LFE signal component is output,
"LFE" is enclosed in a solid line. When an LFE
signal component is not output, "LFE" is
enclosed in a broken line.
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C
LFE
LS
• DTS
Note
When the signal contains rear signal components such
as LS, RS, or S, the Surround effect is enhanced
(page 48).
R
R
RS
"LFE" is always enclosed in a solid line
regardless of the LFE signal component being
output.
PROGRAM FORMAT
DTS 3/2.1
L C
LFE
LS RS
MHC-S90D 4-235-983-43(2) GB
R
GB
35