Sony MHC-S90D Mode D'emploi page 46

Recording to a tape (continued)
Recording a VIDEO CD/CD by
specifying the track order
— Program Edit
When programming, make sure the playing
times for each side do not exceed the length of
one side of the tape.
1
Insert a recordable tape into deck B,
then turn FUNCTION to select "DVD".
2
When the playback is stopped, press
PLAY MODE repeatedly until
"PROGRAM" appears in the front panel
display.
The Program Display appears on the screen.
PROGRAM
– : – – – –
ALL CLEAR
1. – – – –
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
3
Press ENTER (A/V amplifier or remote),
then press O or o repeatedly to select
the disc.
PROGRAM
3 : – – – –
ALL CLEAR
1. – – – –
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
4
Press p.
The cursor moves to the track (in this case,
"01").
Disc type*
PROGRAM
3 : CD
ALL CLEAR
1. – – – –
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
* "?" appears when the system has not loaded the disc
GB
46
information in the memory.
5
6
7
T
ALL
8
9
To cancel Program Edit
Press PLAY MODE repeatedly until "1 DISC"
T
or "ALL DISCS" appears in the display.
ALL
Track
T
ALL
01
02
03
04
05
Select the track you want to program.
For example, select track "02".
Press O/o or the numeric buttons to select
"02" under "T", then press ENTER.
Selected track
PROGRAM
– : – – – –
T
ALL
ALL CLEAR
1. CD – 02
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
To program additional steps, repeat
steps 3 to 5.
Press CD SYNC.
Deck B stands by for recording. To reduce
the hiss noise in low-level high-frequency
signals, press DOLBY NR so that "DOLBY
NR" appears in the display. "REC"
indicator in the display flashes.
Press DIRECTION repeatedly to select
g to record on one side.
Select j (or RELAY) to record on
both sides.
Press REC PAUSE/START.
Recording starts.
MHC-S90D 4-235-983-43(2) GB