Sony MHC-S90D Mode D'emploi page 24

Speaker settings (continued)
Adjusting the speaker volume
and level
1
When the playback is stopped, press
DVD SET UP, then select "SPEAKER
SETUP".
2
Select "TEST TONE" and set "TEST
TONE" to "ON".
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
"BALANCE" or "LEVEL", then press p
or P repeatedly to adjust the value of
"BALANCE", or press o or O repeatedly
to adjust the value of "LEVEL".
The test tone is emitted from both left and
right speakers simultaneously.
4
Select "TEST TONE" and set "TEST
TONE" to "OFF" to turn off the test
tone.
Notes
• When you adjust the speaker settings, the sound
cuts off for a moment.
• If you adjust these parameters using OSD while
adjusting the speaker parameters using SETUP
menu, the display on the unit turns off.
GB
24
MHC-S90D 4-235-983-43(2) GB