Product Description - VOLTCRAFT ET-02 Notice D'emploi

Avoid operation near strong magnetic or electromagnetic fields, transmitter aerials or HF generators.
These could lead to an incorrect measurement being carried out.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediate-
ly and secure it against being operated unintentionally. It can be assumed that safe operation is no
longer possible if:
- the device exhibits visible damage,
- the device no longer functions and
- the device was stored under unfavourable conditions for a long period of time or
- the device was exposed to extraordinary stress in transit.
Do not switch the measuring instrument on immediately after it has been taken from a cold to a warm
environment. The condensation generated could lead to incorrect measurements or cause serious dam-
age to the device. Allow the device to reach room temperature before switching it on.
Do not leave the packaging material lying around carelessly since such materials can become danger-
ous toys in the hands of children.
For safety reasons, when measuring only use the enclosed measuring cables or accessories which are
adjusted to the specifications of the meter.
You should also heed the safety instructions in each chapter of these instructions.

Product Description

The meter (referred to as DMM in the following) indicates measured values along with units and symbols
on the digital display. The measuring value display of the DMM consists of 2000 counts (count = small-
est display value).
If the DMM is not operated for approx. 5 minutes, it automatically switches off. This saves battery power
and extends the period of operation. The battery voltage is always shown in the upper right of the display
to allow you to better estimate the remaining operating period.
The meter can be used for hobby or professional applications.
For better readability, the DMM can also be mounted with the clip on the rear.
Dial switch (5)
The individual measuring functions are selected via a dial switch.
If the meter switch is set to "OFF", the meter is switched off. Always turn the
device off when it is not in use.
25