Connecting To The Display With 20-Pin Input - Pioneer AVIC-900DVD Manuel D'installation

Connecting to the display with 20-pin input

This product
15 cm
Antenna jack
Level Control
This is used for adjusting output from Audio
Output. If you turn it to the right, the volume
increases, while turning it to the left reduces the
volume. (Normally, turn it fully to the right, and
instead use the external equipment outputting
sound, such as a display, for adjusting the vol-
ume.)
Audio output
Video output
GPS aerial
See page 19.
Power cord
Microphone
See page 25.
Not used.
Note:
If you use equipment other than this
unit that require the connection of FM
aerial, use an adequate aerial distributor
available in the shops.
See pages 9-11.
RCA cable
(sold separately)
Please make sure to complete this
connection. Otherwise you cannot
see the image of the DVD-Video.
*1: If AVIC-800DVD is
combined, this connec-
tion is not required.
CD-RGB26P
(sold separately)
RGB output (Green)
Use this jack when
connecting the
Pioneer display.
Green
To RGB input of the
display.
(Ex. AVX-7300)
To Audio inputs.
To VTR input of
the display.
8