Connecting To The Display With 26-Pin Input - Pioneer AVIC-900DVD Manuel D'installation

Connecting the System
Connecting the system
Connecting to the display with 26-pin input (AVH-P7500DVD, AVH-P6500DVD, etc.)
15 cm
Antenna jack
7
This product
Black
(Ex. AVH-P7500DVD, AVH-P6500DVD
AVD-W6210, AVH-P6400CD, AVH-P6400R)
Display unit
Yellow
Microphone
See page 25.
GPS aerial
See page 19.
There may be no voice guidance depending on a
combined display unit. In that case, an external
speaker (commercially available) must be con-
nected to the SP-OUT jack (3.5 ø MINI JACK,
1 W max [8 Ω]) on this unit's back.
Not used.
Power cord
See pages 9-11.
26-pin cable (supplied)
Note:
If you use equipment other than this unit
that require the connection of FM aerial,
use an adequate aerial distributor available
in the shops.
When resetting AV Head Unit
When pressing the reset button of AV Head
Unit while Navigation System and AV Head
Unit (AVH-P7500DVD, AVH-P6500DVD,
AVH-P6400CD, AVH-P6400R) are com-
bined, make sure that ACC is tuned OFF. If
the reset button is pressed while ACC is
ON, it may not work properly.