Using "Av2 Input" (Av2); When Connecting The Rear Display; When Using A Rear Display Connected To Rear Video Output - Pioneer AVIC-Z120BT Manuel D'installation

Section
03 Connecting the System

Using "AV2 Input" (AV2)

The navigation unit
20 cm (7-7/8 in.) (*1)
23 cm (9 in.) (*2)
RCA connector
Yellow
(VIDEO INPUT)
To video output
External
component
(sold separately)
! It is necessary to set "AV2 Input" in "AV
Settings" to "Video" when connecting the
external video component. (For details,
refer to Operation Manual.)
18
En
(*1)
AVIC-Z120BT
(*2)
AVIC-X920BT
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
To audio outputs
video
When connecting the rear
display
The navigation unit
15 cm (5-7/8 in.)
RCA connector
Yellow
(REAR MONITOR
OUTPUT)
To video input
Rear display with
RCA input jacks
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This navigation system's rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
This connection
is available for
AVIC-Z120BT.
Red, white
(REAR MONITOR
OUTPUT)
RCA cables
(sold separately)
To audio inputs