Makita DUM111 Manuel D'instruction page 14

3. Remove the undercover.
► 1 . Undercover
4. Loosen two screws with a screwdriver and remove
the shear blades.
► 1 . Screws
NOTE: The shear blades can be removed without
removing the screws.
5. Remove the crank from the shear blades.
1
► 1 . Crank
1
1
14 ENGLISH
NOTE: The crank may remain in the tool.
NOTE: Attach the blade cover and the storage case
to the removed shear blades, and then store the
blades.
Installing shear blades
1. Prepare the crank, undercover, and new shear
blades.
1
► 1 . Crank 2. Undercover 3. Shear blades
2. Attach the blade cover to the shear blades.
► 1 . Blade cover
3.
Adjust the three pins so that they are lined up on
the alignment line.
► 1 . Alignment line
2
3
1
1