Assembly/Disassembly; Assembling The Meat Grinder - SilverCrest SFW 350 D5 Mode D'emploi

Assembly/Disassembly

CAUTION! PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from
corrosion. Therefore, carefully clean all of the parts before using the
appliance for the first time, as described in detail in the chapter "Cleaning".
After subsequent usage, always apply a light coating of cooking oil to the
metallic components.
NOTICE
► Before using for the first time, remove the protective foil from the control panel.

Assembling the meat grinder

Unfold the fold-out side. There you will find the step-by-step illustrations for
assembling the appliance.
1) Coat all metal parts with cooking oil.
2) Place the transport screw 7 in the meat grinder casing 6.
3) Place the spring 8 onto the transport screw 7.
4) Then fit the cross blade 9 on so that the sharp side points away from the
spring 8. Ensure that the square opening in the cross blade 9 is placed
correctly on the square axle.
WARNING! RISK OF INJURY!
The cross blade 9 is very sharp! Risk of injury!
►
CAUTION! PROPERTY DAMAGE!
The appliance will be damaged if the cross blade 9 is inserted the other
►
way around!
5) Select the appropriate cutting disc 0/sausage disc e.
│ GB │ IE
■ 6 SFW 350 D5