Sony LMD-3251MT Instructions D'utilisation page 87

Submenu Setting
3D SIGNAL Selects input signal format for 3D
FORMAT display.
• 3G-B: Displays 3G Level-B HD-SDI
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24p, 25p,
30p or 720/50p, 60p signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
• DUAL: Displays dual-stream HD-SDI
signals for 3D display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24p, 25p,
30p or 720/50p, 60p signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
• SEQUENTIAL: Displays field
sequential HD-SDI signals for 3D
display mode.
• SIDE BY SIDE: Displays side-by-
side typed HD-SDI signals for 3D
display mode.
•INTER: Displays 1080/50i or
1080/60i signal.
•PROG: Displays 1080/24p, 25p,
30p or 720/50p, 60p signal.
•PSF: Displays 1080/24PsF or
1080/25PsF signal.
• LINE BY LINE: Displays line-by-
line typed HD-SDI signals for 3D
display mode.
• AUTO1: 3D display mode is
automatically selected for 3G
Level-B HD-SDI signals. Other
formats are displayed in 2D
display mode.
• AUTO2: When 3G Level-B 3G-SDI
signals are input, the channel
assign information enables 3D
display mode and 2D display
mode to be automatically
switched.
DISPARITY SIM. Adjusts the phase of left/right input
signals. You can monitor the depth of 3D
images using simulated 3D effect.
• LR: Shifts the phase of left and right
channels at the same time.
• RIGHT: Shifts the phase of right
channel.
• LEFT: Shifts the phase of left
channel.
Submenu Setting
HOROPTER Select ON to switch the display settings
CHECK for the left/right channel signals. Select
OFF when you do not wish to perform
switching. By changing the display
settings, the left/right signals become
easier to identify.
• NORMAL: Displays video signals.
• BLUE: Displays video signals as RGB
blue color component.
• RED: Displays video signals as RGB
red color component.
• MONO: Displays video signals as
grayscale image.
• BLACK: Displays black signals. (No
video signals)
FLIP H Changes display patterns (normal/
horizontally reversed display) in
monitoring left/right input signals.
• OFF: Deactivates the reversing
function.
• LEFT: Horizontally reverses left
signal.
• RIGHT: Horizontally reverses right
signal.
PAYLOAD ID Displays the channel assign information
of payload ID superimposed on input
signals from the IN (INPUT)-1 and IN
(INPUT)-2 connector on BKM-
250TGM. Going out of the 3D
SETTING menu renews channel assign
information.
• -: Payload ID is not superimposed on
signals.
• x: Channel assign information is
detected as Link-3 or Link-4.
• LEFT: Channel assign information is
detected as Link-1.
• RIGHT: Channel assign information
is detected as Link-2.
Payload ID is only available when
DUAL is selected in 3D SIGNAL
FORMAT.
2D/3D DISPLAY Sets the on-screen indication of the
display mode currently viewed.
Selecting AUTO or ON displays "2D" or
"3D" at the top left of the screen,
according to the display mode selected.
• AUTO: "2D" or "3D" is displayed for
about five seconds after switching
between the 2D and 3D display
mode.
• ON: "2D" or "3D" is always
displayed.
• OFF: The display is hidden.
87
Adjustment Using the Menus