Sony LMD-3251MT Instructions D'utilisation page 82

Submenu
BACKGROUND
SD PIXEL MAPPING
SPLASH LOGO
82
Adjustment Using the Menus
Setting
Sets the brightness of the black bars
appearing in the upper and lower
positions of the screen, or on the
sides of the screen.
• OFF: Displays a darker bar
(black).
• ON: Displays a brighter bar
(gray).
Selects SD picture size (pixels)
according to input signal format.
• COMPOSITE&Y/C: Set to
monitor the signal input
through the COMPOSITE
IN connector or Y/C IN
connector.
• RGB/COMPONENT: Set to
monitor the signal input
through the R/G/B IN
connector or Y/P /P IN
B R
connector.
When picture signals in the
size of 720 × 576 (50i)
(or 720 × 487 (60i)) are
input
Select 720 × 576 (or 720 ×
487). This is the default
setting.
When 702 × 576 (or 712 ×
483) is selected, all sides of
the input picture are cut off
by several pixels.
When picture signals in the
size of 702 × 576 (50i)
(or 712 × 483 (60i)) or
equivalent are input
Select 702 × 576 (or 712 ×
483).
When 720 × 576 (or 720 ×
487) is selected, a black
border (of several pixels
wide) appears around the
input picture.
Sets the splash logo display time
when the monitor is turned on.
• OFF: The splash logo is not
displayed.
• 1: The splash logo is displayed
for about 5 seconds.
• 2: The splash logo is displayed
for about 10 seconds.
MULTI DISPLAY SETTING
USER CONFIG MULTI DISPLAY SETTING
M U LT I D I S P L AY E N A B L E :
D I S P L AY L AYO U T :
S U B I N P U T S E L E C T :
P O S I T I O N :
F R A M E :
S U B P I C T U R E S I Z E :
Submenu Setting
MULTI DISPLAY Selects ON to display the multi display
ENABLE and OFF not to display.
Notes
• When the frame frequency of the
main display is different from that of
the sub display, the picture may be
disturbed.
When no signal is input to the main
display, the picture may not be
displayed correctly.
• When you set SUB INPUT SELECT
to OFF, MULTI DISPLAY ENABLE
is set to OFF automatically.
• When MULTI DISPLAY ENABLE is
set to ON, APA (page 84) is not
available.
• When PIP multi display mode is
selected, 3D display is only available
in the main display. In other multi
display modes, images appear in the
2D display.
xxx
xxx
xxx
x
x
x