Measurements And Units; To Set Or Check Unit Of Measurement Settings - Suunto OBSERVER TT Mode D'emploi

a) The top field displays numbers or text depending on the mode or sub mode you are
viewing.
b) The middle field displays large numbers and/or the related unit of measure of a
function.
c) The bottom field displays either numbers and/or text.
d) The Mode Indictor Bar displays the main modes of the Observer. The half oblong
shape located just below the bar indicates the mode you are viewing. The half-
moon shape
barometer (weather station) or altimeter.
e) The outer circumference of the LCD graphically tracks the units of measure based on
the selected mode.
f) On the top left, an arrow shaped
reference view of weather conditions.

1.10 MEASUREMENTS AND UNITS

The Observer supplies two units of measure: Metric or Imperial. Each unit can be
selected individually.
Metric Unit of Measure

1.10.1 To Set or Check Unit of Measurement Settings

If the mode indicator is not on TIME, press the [MODE] button until it is directly below
TIME.
1. Press the [MODE] and [SELECT] buttons simultaneously for 3 seconds to enter the
under the mode indicator indicates the Observer is being used as a
m
m/min
ºC
hPa
Barometric Trend Indicator provides a quick
Imperial Unit of Measure
ft
ft/min
ºF
inHg
11