Emc Information; Symbols On The Product - Invacare Softform Premier Active 2S Manuel D'utilisation

Invacare® Softform® Premier Active 2S
IMPORTANT!
The information contained in this document is
subject to change without notice.
– Check all parts for shipping damage and test
before using.
– In case of damage, do not use.
– Contact Invacare® / Carrier for further
instructions.

2.2 EMC information

There is no known risk of adverse effects on the Active
2S control unit caused by other electromagnetic devices,
present at the time of treatment. Similarly there is no
known risk of the Active 2S control unit causing adverse
effects on other electromagnetic devices.

2.3 Symbols on the product

Do not pierce or
cut
Do not dry clean
User weight limit
Do not put near
flame
Do not bleach
8
Line dry
CE conform
Recommended
80°
80 °C
Do not iron
Tumble dry low
heat
Class II medical
equipment
Type BF applied
part
WEEE conform
Refer to user
manual
Date of
manufacture
Keep dry
1627426-A