Alarm Function - AEG MRC 4143 Mode D'emploi

2. Press the SET/PRE/M+ button. The pre-set location will be displayed. Select the pre-
set location with the MIN/TU+ or the HOUR/TU- button.
3. Press the SET/PRE/M+ button to store the station.
Recalling preset radio stations
While in radio operation, repeatedly press the SET/PRE/M+ button. One pre-set location
after the other will be called up.

Alarm function

General information
• You may now set the alarm times in time mode.
• You'd like to be woken up by radio? Set the correct volume and the station ahead of
time.
• When the alarm time is reached, a dot flashes next to AL1 BUZZER or AL1 RADIO or
AL2 BUZZER or AL2 RADIO.
Setting the Alarm Time
1. First select how you want to be woken:
• Press the AL1/VOL- button once to be woken by the buzzer. The dot next to the
alarm time text "AL1 BUZZER" flashes.
• Press the AL1/VOL- button again to be woken up by the last set radio station. The
dot next to the alarm time text "AL1 RADIO" flashes.
• If you press the button again, the dot on the display goes out and the alarm func-
tion is deactivated.
2. Set the alarm time with the HOUR/TU- and the MIN/TU+ button.
3. Confirm your input with the AL1/VOL- button.
NOTE:
If you don't press any button within about 3 seconds, the settings are adopted auto-
matically.
To set the second alarm time, repeat the above steps each with the AL2/VOL- button.
Shutting off of the alarm signal
To switch off the alarm signal until the following day, press the ON/OFF / AM/FM button.
English
47