Alarm Function; General Information - AEG MRC 4157 Mode D'emploi

Preset Station: Keep the TIME SET / M + button pressed for approx. 3 seconds.
Select a preset location with the buttons MIN / TU + / HOUR / TU –. Press the TIME
SET / M + button once more. The station is preset.
NOTE:
• If the reception is too weak and there is interference on the received station, try
to improve the reception by altering the position and uncoiling or coiling the
antenna.
• The device features a built-in antenna for receiving AM radio stations. Reposi-
tion the device for better reception of a station.
Select the Preset Radio Station
While in radio operation, repeatedly press the TIME SET / M+ button. One pre-set
location after the other will be called up.

Alarm Function

General Information

• You'd like to be woken up by radio? First set a station. The device switches on the
last FM radio station that was set.
• When the alarm time is reached, a dot flashes next to "BUZZER AL 1" or "RADIO
AL 1" and / or "BUZZER AL 2" or "RADIO AL 2".
Setting of the Alarm
You can set two alarm times. Proceed as follows:
1. Keep the AL1 / VOL − button pressed for approx. 3 seconds. The indicator begins
to flash.
2. Set the hours with the HOUR / TU – button and the minutes with the MIN / TU +
button.
3. Then use the AL1 / VOL − button to select how you want to be woken up. Select
from:
• Buzzer ( BUZZER AL 1 ):
A buzzer sounds when the alarm time is reached. The volume of the buzzer
cannot be adjusted.
• Last heard radio frequency ( RADIO AL 1 ):
As soon as your set alarm time is shown, the radio switches on. The last FM
station plays at the volume set by the manufacturer.
MRC4157_IM_new2
English
65
09.09.16