Alarm Function - AEG MRC 4119 P N Mode D'emploi

English
62
Preset stations
You can preset up to 10 radio stations.
1. Search for a station as described under "Radio station tuning".
2. Keep the MEM/M+ button (7) pressed. The preset location indicator flashes on the
display (e.g. P02).
3. Use the C/F / YEAR (5) and DST / M/D (14) buttons to select the desired preset
station memory.
4. Press the MEM/M+ button to preset the station.
NOTE:
If no backup battery has been inserted, all channels saved will be lost in the event of
disconnection from the mains.
Tune into the preset station
Press the MEM/M+ button (7) repeatedly in radio mode to scan through the preset sta-
tion memory.

Alarm function

Setting of the Alarm
You can set two alarm times. Proceed as follows:
1. Press button (13). The current alarm time and the "
2. Keep the button pressed for approx. 3 seconds when the alarm time is displayed.
The hours of the currently set alarm time start to flash.
3. Use the buttons C/F / YEAR (5) and DST / M/D (14) for setting.
4. Press the button for confirmation. The minutes start to flash.
5. Use the buttons C/F / YEAR and DST / M/D for setting.
6. Now select the days you want the alarm to sound. The following selections can be
made:
• 1-5 = Monday to Friday
• 1-7 = Monday to Sunday
• 6-7 = Saturday and Sunday
• 1-1 = Weekday
6a. When you have selected the setting 1-1:
1. Press the button to select the weekday.
2. Make your selection with the buttons C/F
(MON = Monday, TUE = Tuesday, WED = Wednesday, THU = Thursday,
FRI = Friday, SAT = Saturday, SUN = Sunday)
" icons will be displayed.
/ YEAR and DST / M/D.