Overview Of The Components - AEG MRC 4157 Mode D'emploi

Overview of the Components

1 POWER / FUN button
2 HOUR / TU − button
3 MIN / TU + button
4 SNOOZE / SLEEP / HIGH / LOW / OFF button
5 TIME SET / M + button
6 AL1 / VOL − button
7 AL2 / VOL + button
8 Indicator for radio switched on ( FM )
9 Indicator for activated alarm function 2 ( BUZZER AL 2 ) ( Buzzer )
10 Indicator for activated alarm function 2 ( RADIO AL 2 ) ( Radio )
11 Indicator for activated "Delayed Switch-off" function ( SLEEP )
12 LED display
13 Indicator for radio switched on ( AM )
14 Indicator for activated alarm function 1 ( BUZZER AL 1 ) ( Buzzer )
15 Indicator for activated alarm function 1 ( RADIO AL 1 ) ( Radio )
16 Put-up hinge
17 DC 5V power supply connection
18 AUX IN jack ( 3.5 mm stereo jack )
19 headphone jack
20 USB - OUT CHARGE charging socket
Back Side ( not shown )
Battery compartment ( power reserve )
FM wire aerial
First Use of the Device / Introduction
• Select a proper place for the device. A dry, level and slip proof surface is suitable.
• Make sure the device is vented sufficiently!
• Remove the protective film from the device, if present.
• In all modes, the display automatically switches to the time display after about
10 seconds.
Power Supply
1. Make sure the grid voltage corresponds to the figures on the rating plate.
MRC4157_IM_new2
English
61
09.09.16