Milwaukee V28 Manuel De L'utilisateur page 3

SPECIFIC SAFETY RULES
1. Hold power tools by insulated gripping surfaces when performing an operation
where the cutting tool may contact hidden wiring or its own cord. Contact with a
"live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or
missing, contact a MILWAUKEE service facility for a free replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to fi lter out microscopic particles.
Symbology
Volts Direct Current
Impacts per Minute Under
Load (IPM)
Underwriters Laboratories,
Inc., United States and
Canada
4
FUNCTIONAL DESCRIPTION
1. 1/2" drive shank
2. Forward/Reverse switch
3. Trigger
4. Battery pack
5. Battery pack release buttons
6. Tool hanger
7. Tool hanger ring
1
8. 7/16" hex quick-change chuck
8
Cat. No. 0799-20
Specifi cations
Volts No Load
Cat.
DC RPM
No.
28 0 - 1450
0779-20
28 0 - 1450
0799-20 7/16" Hex
* Output rated at full speed
Drilling Capacities
Cat. No. Quick Change Auger Bits
0779-20
0799-20
7
6
Cat. No. 0779-20
2
3
4
Impacts Average
Drive Per Torque
Shank Minute Output*
1/2" 0 - 2450 325 ft-lbs.*
0 - 2450
325 ft-lbs.*
Selfeed Bits
1-1/2" 2-9/16"
1-1/2" 2-9/16"
5
5