Bosch GCM 12 GDL Professional Notice Originale page 34

OBJ_BUCH-1360-005.book Page 34 Wednesday, December 21, 2016 1:10 PM
34 | English
 Do not direct the laser beam at persons who are looking
through binoculars or similar instruments. Doing so can
damage their eye.
 Do not make any modifications to the laser equipment.
The setting options described in these operating instruc-
tions can be used safely.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Keep your fingers clear of the movable parts of the
glide arm. Danger of fingers being crushed or contused
and considerably injured.
 Before switching on and during the complete sawing,
hold the handle firmly. While sawing, carry out a con-
trolled motion with the glide arm. A moment of inatten-
tion while operating the extremely smooth-running glide
arm can result in serious personal injury.
 Always saw through the workpiece from front to rear.
Otherwise, there is danger of kickback when the saw blade
becomes wedged in the workpiece.
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more safely.
Symbols and their meaning
 Laser Radiation
Do not stare into beam
Class 2 laser product
 Keep hands away from the cutting area
while the machine is running. Danger of
injury when coming in contact with the
saw blade.
 Wear a dust respirator.
1 609 92A 2P3 | (21.12.16)
Symbols and their meaning
 Wear safety goggles.
 Wear ear protectors. Exposure to noise
can cause hearing loss.
 Danger area! Keep hands, fingers or
arms away from this area.
 Keep your fingers clear of the movable
parts of the glide arm. Danger of fingers
being crushed or contused and consider-
ably injured.
30
Ø
305 mm
Ø
mm
Observe the dimensions of the saw blade. The hole diameter
must match the tool spindle without play. Do not use reduc-
ers or adapters.
When transporting the machine, hold it only
at the locations indicated (recessed han-
dles) or by the transport handle.
Never carry the power tool via the handle of
the glide arm.
Bevel lock lever open:
Adjusting bevel angles is possible.
Bevel lock lever shut:
The set bevel angle of the glide arm is locked.
Bosch Power Tools