Basic Operations; Turning On The Power - JVC KD-AR3000 Manuel D'instructions

1

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
• To operate the tuner, press FM/AM.
Then, press FM/AM repeatedly to select
the band (FM1, FM2, FM3, or AM).
• To operate the CD player (CD),
CD changer (CD-CH), or external
component (LINE-IN or SIRIUS)
For KD-AR3000:
• Press CD/CD-CH LINE repeatedly.
For KD-LH300:
• Press CD/CD-CH repeatedly.
(or LINE-IN/SIRIUS*
1
*
Without loading the CD, you cannot select
"CD" as the source.
3
TUNER
CD* 1 CD-CH* 2
(or SIRIUS* 3 )
LINE-IN
CD* 1
CD-CH* 2
3 )

BASIC OPERATIONS

2
* Without connecting the CD changer, you
cannot select "CD-CH" as the source.
3
* To select the external component as the source,
set "Ext Input" correctly (see page 39).
3
Adjust the volume.
Volume level appears.
Current sound mode (iEQ)
(see page 25)
4
Adjust the sound as you want.
(See pages 24 – 27.)
Note:
While playing a source, you can select the display
theme of your preference. For details, see "Selecting
the display theme" on page 28.
NOTICE:
The illustrations of the display used in this manual
are mainly of the initial setting when shipped from
the factory. If you have changed the display
themes or some PSM items, the actual displays
you see will be different.
2
To increase the volume
To decrease the volume
7