Screw Home The Kingpin; Implementation - SAF 50S15 Manuel D'utilisation

6 Implementation

5.5 Screw home the kingpin

Danger!
• Risk of serious traffic accidents due to the loss of
• After dismantling and for final mounting, all old
1 Install the kingpin Page 18.
2 Screw the kingpin tightly to the mounting flange using screws and
tighten according to the tightening torques Page 26.
6 Implementation
Danger!
Risk of serious traffic accidents due to the loss of traffic
safety and operational safety which may lead to serious
or fatal injuries.
The kingpin must be correctly mounted on the vehicle Page
18.
Careful!
Risk of damage to the kingpin!
Lubricate the kingpin before commissioning.
1. Check the kingpin for damage Page 22.
2. Check the kingpin is correctly mounted Page 13.
3. Lubricate the kingpin according to the manufacturer's instructions Page
25.
4. Thoroughly clean the bolster plates of the semi-trailer and check for
damage Page 21.
20
XL-KP11695BM-en-DE Rev. A · 11.2013 · Errors and changes excluded · © SAF–HOLLAND
traffic safety and operational safety which may lead
to serious or fatal injuries.
screws must always be replaced with new ORIGINAL
screws from SAF-HOLLAND.