Installation Of The Kingpin; Mounting Requirements - SAF 50S15 Manuel D'utilisation

5 Installation

5.4 Installation of the kingpin

Mounting overview
Mounting overview
Fig. 7, item
–1–
–2–
–3–

Mounting requirements

Careful!
• The mounting is done according to the vehicle
• For the assembly of the kingpin, original screws from
• For reasons of strength, we recommend that you use
18
XL-KP11695BM-en-DE Rev. A · 11.2013 · Errors and changes excluded · © SAF–HOLLAND
manufacturer's guidelines.
SAF-HOLLAND must be used.
a plate thickness of 12 mm for 2" and 16 mm for 3.5"
fifth wheel kingpins. If lesser plate thicknesses are
used, the bracing of the kingpin must be constructed
correspondingly. Recommended material of bolster
plate S355J2.
Fig. 7 · Kingpin mounting overview
Designation
Flange
Pin
Screws
1
2
3
KP-0010