Control Panel - Velleman HQ POWER VDPL5X5MH Mode D'emploi

DMX-512 Connection

When applicable, connect an XLR cable to the female XLR output of a controller (not incl.) and the
other side to the male XLR input of the device. Multiple devices can be linked through serial linking.
The linking cable shall be a dual core, screened cable with XLR input and output connectors.

A DMX terminator is recommended for installations where the DMX cable has to run a long distance
or is in an electrically noisy environment (e.g. discos). The terminator prevents corruption of the
digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω
resistor between pins 2 and 3, which is then plugged into the XLR output socket of the last device in
the chain.
7. Operation
7.1

Control Panel

Access the control panel functions using the four panel buttons located around the display:
Button Function

MENU


ENTER


UP


DOWN

Menu
main menu
DMX functions
Motor setup
Display setup
System setup
V. 03 – 18/11/2014
access the menu
return to a previous menu option
select menu option
store the current menu or option within the menu
scroll through the menu options in ascending order
increase value
scroll through the menu options in descending order
decrease value
function and values
DMX address
DMX channels
Pan inverse
Tilt inverse
Motor offset
Backlight
Display inverse
Warn cue
White balance
Dimmer mode
Temperature unit
VDPL5X5MH
1-512
9CH
10CH
13CH
23CH
81CH
106CH
119CH
No/Yes
No/Yes
Pan
Tilt
On
10S
20S
30S
Yes
No
Off
On
Red
Green
Blue
Off
Dimmer 1
Dimmer 2
Dimmer 3
°C
7
description
DMX address
DMX channel
Inverse pan
Inverse tilt
000-255 Offset pan motor
000-255 Offset tilt motor
Remains on
Turns off after x
seconds
Upside-down
Normal display
125-255
125-255 White balance
125-255
Dimmer mode off
Dimmer fast
Dimmer middle
Dimmer slow
©Velleman nv