Dmx Mode - Velleman HQ POWER VDPL5X5MH Mode D'emploi

Protocol setup
ArtNet setup
Test setup
Reset setup
Information
7.2

DMX Mode

The DMX mode allows you to control the device with any universal DMX controller.

All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to "listen" to
the DMX controller. The same starting address can be used for a whole group of devices or an
individual address can be set for every device.

When all devices have the same address, all the units will "listen" to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will "listen" to a separate channel
number. Changing the settings of one channel will only affect the device in question.
To set the device to work with a DMX controller:
1. Set the operating protocol:
a. Press MENU to enter the menu.
b. Press UP or DOWN to select <Protocol setup>. Confirm with ENTER.
c.
Press UP or DOWN to select <Only DMX>. Confirm with ENTER.
V. 03 – 18/11/2014
VDPL5X5MH
Fan mode
Factory settings
Only DMX
Only ArtNet
ArtNet+DMX
KlingNet+DMX
IP mode
Net
Subnet
Universe
Start channel
Auto test
Manual test
Auto reset
IP address
Device ID
Temperature
Fixture time
Software version
°F
Auto speed
High speed
No
Yes
Static
DHCP
x.xxx.xxx.
Manual
xxx
0-127
0-15
0-15
1-512
Pan
Pan fine
Tilt
Tilt fine
P/T speed
Dimmer 000-255
Shutter
Red
Green
Blue
White
x.xxx.xxx.xxx
xxxxxxxxx
XX
0-9999
CPU-A xxx
CPU-B xxx
CPU-C xxx
8
Temperature unit
selection
Automatic
High speed
Return to factory
settings
Operating protocol
Manual with IP address
entry
Network address
Subnet address
Universe address
DMX start channel
Run auto test
Pan movement
Pan fine movement
Tilt movement
Tilt fine movement
Pan/tilt speed
Dimmer
Shutter
Red colour
Green colour
Blue colour
White colour
Factory settings
Current IP address
Device ID
Current temperature
Running time
Current software
version
©Velleman nv