Switching The Audible Signal On/Off; Setting The Language; Setting The Water Hardness - Siemens TI 303 Mode D'emploi

Machine à expresso automatique
Masquer les pouces Voir aussi pour TI 303:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Switching the audible signal
on/off
Whenever a button is pressed, an
audible signal sounds.
This can be switched on or off.
Press and hold % and
1.
calc'nClean for at least 3 seconds.
Touch the "V" button cappuccino
2.
repeatedly until "Sound" appears.
Confirm by pressing the "ok" button
3.
latte macchiato.
The setting is saved.
Touch the "V" button cappuccino
4.
and select "Sound on" or "Sound
off".
Confirm by pressing the "ok" button
5.
latte macchiato.
The setting is saved.
Touch the "¾" button caffe crema to
6.
exit the menu.

Setting the language

Press and hold % and
1.
calc'nClean for at least 3 seconds.
Touch the "V" button cappuccino
2.
repeatedly until "Language" appears.
Confirm by pressing the "ok" button
3.
latte macchiato.
The setting is saved.
Touch the "V" button cappuccino
4.
and select the required language.
Confirm by pressing the "ok" button
5.
latte macchiato.
The setting is saved.
Touch the "¾" button caffe crema to
6.
exit the menu.

Setting the water hardness

It is important to set the water hardness
correctly so that the appliance indicates
in good time when the descaling
programme should be run. The preset
water hardness is level 4.
You can check the water hardness
using the enclosed test strip or by
asking your local water supplier.
Briefly immerse the enclosed test
1.
strip in fresh tap water, leave it to
drip and read off the result after 1
minute.
The number of fields on the test strip
that change colour indicate the water
hardness level.
Press and hold % and
2.
calc'nClean for at least 3 seconds.
Touch the "V" button cappuccino
3.
repeatedly until "W. hardness"
appears.
Touch the "ok" button latte
4.
macchiato and confirm.
Touch the "V" button cappuccino
5.
and select the water hardness. The
following settings are possible:
W. hardness 1
W. hardness 2
W. hardness 3
W. hardness 4 (factory setting)
Water filter (when used)
H2O-Softener (setting if water
softener available)
Touch the "ok" button latte
6.
macchiato to save the setting.
Touch the "¾" button caffe crema to
7.
exit the menu.
Settings en
17

Publicité

Table des Matières
loading

Table des Matières