Assembly And Components; Controls - Siemens TI 303 Mode D'emploi

Assembly and components

~ Fig. "
( On / off button (stand-by mode)
0 Display
8 Control panel
@ Handle of milk frother
H Outlet system for coffee, height
adjustable
P Milk frother (holder, frother, cover),
height adjustable

Controls

By touching the fields, you can e.g.
select and start making a drink or adjust
the coffee strength.
Button Meaning
k Switch the appliance on and off
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■
■
The appliance is ready for use when the LEDs of the buttons for selecting drinks light
up in the control panel. The appliance has automatic switch-off. ~ "Selecting
automatic switch-off" on page 16
Dispensing Espresso
espresso
caffe crema Dispensing Caffe crema
or display navigation "¾" (back without saving).
Dispensing cappuccino
cappuccino
or display navigation "V" (navigate down).
latte macchiato Dispensing latte macchiato
or display navigation "ok" (confirm and save).
milk Frothing up milk
%
Coffee strength
Adjusting the coffee strength ~ "Operating the appliance" on page 12
calc'nClean Start the service programme
Flashes when the service programme needs to be performed.~ "Calc'nClean
service programme" on page 23
#
Make 2 Espresso or 2 Caffe crema at the same time. Position the cups next to one
another under the coffee dispenser.~ "Operating the appliance" on page 12
it is still warm when switched on, or
coffee was not dispensed before the appliance was switched off.
Getting to know your appliance en
X Drip tray (coffee grounds
container, drip grate, drip plate,
float)
` Door of brewing chamber
h Rating plate
)" Brewing unit
)* Aroma lid
)2 Bean container
): Rotary selector for setting grinding
level
)B Cover for water tank
)J Water tank
)R Cup warmer
9