Thermador PROFESSIONAL PRO GRAND PRD30 Guide D'utilisation Et D'entretien page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Position the racks correctly in the oven. The correct
rack position depends on the recipe and the cooking
mode. The rack positions are numbered from the
bottom of the oven, like an elevator. Rack position 3
is the most frequently used position. Place rack(s) in
the proper position before turning on the oven.
Figure 1: Main Oven Rack Positions
®
5. THERMADOR
Full Access
standard on all models. Each gliding oven rack can
be pulled out and pushed back into the oven with
minimal effort — even while supporting a large turkey
or roast.
Always remove
before Self Clean
6. Ensure that the burner caps are correctly seated on
the burner bases of the range's cooktop (see
Figure 15 and Figure 16 on Page 14). Turn on each
burner to check for proper flame color. See "Flame
Description" on page 15 for details.
English 8
®
oven racks are
Figure 2: Full Access Oven Rack
IMPORTANT:
Always remove the Full Access oven racks before self-
cleaning the oven. If the gliding racks remain in the oven
during Self-Clean, lubricants in the glide mechanisms of
each rack will be lost and the finish will discolor.
To help prevent burns, NEVER remove or reposition the
oven racks while the oven is ON or while the oven is
cooling.
5 5
4 4
Placing Rack In Oven:
3 3
To insert a rack in the oven, hold the rack with the back rail
2 2
up toward the back. Place the safety hooks under the front
1 1
of the rail guides. Push the rack into the oven, lifting the
rack stops over the front of the rail guides. Slide the rack
into position.
When placing food on a rack, pull the rack out to the stop
position. The racks are designed to lock and not tilt while in
fully-extended position.
Removing Rack from Oven:
To remove or reposition a rack in the oven, pull the rack
toward the front of the oven. Lift up the front of the rack
over the safety stops and pull the rack from the oven.
IMPORTANT:
oven, make sure the front supports on the rack guides
rest in the large slots at the front corners of the rack, as
shown. This is necessary to keep the rack in the correct
position while fully inserted into the oven.
Figure 3: Side View of Rack on the Rack Guide
WARNING:
Side View
Side View
Side View
When placing the gliding rack in the

Publicité

Chapitres

Table des Matières
loading

Table des Matières