Burner Cap Placement - Thermador PROFESSIONAL PRO GRAND PRD30 Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If a burner fails to ignite, refer to "Before Calling for Service"
on page 38.
Burner Base
Burner Base
Burner Base
Figure 14: STAR ® Burner Components
CAUTION:
DO NOT touch the STAR
sparking.

Burner Cap Placement

The burner caps must be properly placed on the burner
bases for the cooktop to function properly. If the burner cap
is not properly placed, one or more of the following
problems may occur.
Burner flames are too high.
Flames shoot out of burners.
Burners do not ignite.
Burner flames light unevenly.
Burner emits gas odor.
WARNING:
To prevent flare-ups and avoid the creation of harmful
by-products, do not use the cooktop without all burner
caps and all burner grates properly positioned.
WARNING:
To prevent burns, do not touch burner caps or grates
while hot. Turn the cooktop off and allow the burners to
cool.
English 14
Burner Cap
Burner Cap
Burner Cap
Igniter
Igniter
Igniter
®
burners when the igniters are
Checking Burner Cap
Placement
Check each burner to make sure there is no gap
between the burner cap and burner base. See
Figure 15 and Figure 16: Correct and Incorrect Burner
Cap Placement to see examples of correct and
incorrect placements of the burner cap.
You may gently try to move the burner caps from side
to side to check if the caps are properly placed on the
burner bases. When properly placed, each burner cap
will rest flat on top of its burner base, and completely
cover the star-shape of the burner base when viewed
from the top as shown in Figure 15: "Correct Burner
Cap Placement".
Figure 15: Correct Burner Cap Placement
Figure 16: Incorrect Burner Cap Placement

Publicité

Chapitres

Table des Matières
loading

Table des Matières